Email:kristie@jcpaowanji.com Qingdao Jichuan Machinery Manufacturing Co.,Ltd

Qingdao Jichuan Machinery Manufacturing Co.,Ltd

Drum-type Shot Blasting Machine To Save The Construction Costs

Roller-type shot blasting machine is mainly the use of high-speed rotation of the impeller will be shot into the drum continuously flip the workpiece, so as to achieve the purpose of cleaning the workpiece, belonging to the scope of casting machinery. It applies to all industries in the 15 kg below the casting and forging sand, rust, descaling and surface strengthening.

Roller-type shot blasting machine is suitable for cleaning all kinds of cast, forging, scissors, is a small heat treatment workshop to clean the surface of the workpiece residual sand, Roller Conveyor Shot Blasting Machine the ideal equipment for oxide, the main drum, separator, shot blasting machine, Gear motors and other components.

The advantages of drum type shot blasting machine

1. The use of the popular pit-free form, saving the pit foundation of the construction costs

2. Shot blasting chamber and shot blasting device layout are determined by computer three-dimensional dynamic simulation after the simulation, so that the coverage of the projectile coverage area accurately covers the surface of the workpiece, the projectile at the same time throwing the workpiece from the workpiece in the direction of the surface The

3. The use of high ejection speed cantilever centrifugal shot blasting machine, Roller Conveyor Shot Blasting Machine can significantly improve the cleaning efficiency, to obtain a satisfactory clean-up quality

4. Machine design concept novel, Roller Conveyor Shot Blasting Machine compact structure, easy to use and maintenance

Drum type shot blasting machine how to maintain:

1, the annual maintenance:

(1) overhaul all motor bearings;

(2) check the lubrication of all bearings, and add new grease: check the cylinder airway corrosion and the wall of the oil situation, if the corrosion is serious, then the replacement, Roller Conveyor Shot Blasting Machine if the oil is more, then cleaning;

(3) replacement or welding of the projectile area;

(4) overhaul the dust collector, if the damage is replaced, if the sticky ash and more cleaning.

2, quarterly maintenance:

(1) check the motor, sprocket, fan, screw conveyor fixed bolts and flange tightness;

(2) check the bearing, electric control box intact situation;

(3) Roller Conveyor Shot Blasting Machine to the blasting machine main bearing on the bearing to replace the new high-speed grease;

(4) check the wear of the blasting machine wear plate.

3, the monthly maintenance:

(1) check the transmission parts of the normal operation, and lubrication chain;

(2) check the fan, duct wear and fix the situation;

(3) Roller Conveyor Shot Blasting Machine Check the fixing of bolts at the connection of each part.

4, the daily maintenance:

(1) abrasive wear parts wear parts, and timely replacement;

(2) whether the signal on the console is working properly;

(3) the limit switch status is normal;

(4) cleaning the dust on the electrical control box;

(5) Shot blasting machine and shot blasting machine on the fixed bolts on the motor;

(6) whether the phenomenon of leakage of dust in the dust filter in the filter bag with or without dust or broken;

(7) Roller Conveyor Shot Blasting Machine whether the maintenance doors are closed;

(8) in the separator on the filter without accumulation and timely removal;

(9) whether the electric control for the pill valve is closed;

(10) shot blasting room within the plate wear.


Copyright © Qingdao Jichuan Machinery Manufacturing Co.,Ltd. All rights reserved.
QR Code