Email:kristie@jcpaowanji.comQingdao Jichuan Machinery Manufacturing Co.,Ltd

Qingdao Jichuan Machinery Manufacturing Co.,Ltd

Maintenance Of Roller Type Shot Blasting Machine

Roller-type shot blasting machine: The host internal use of wear-resisting alloy steel + wear-resistant annular rubber belt, working box for a continuous rotation of the drum, in order to reduce the shot and roller rotation friction and collision,

A special wear-resisting rubber belt is added to the interior. operation, Roller Conveyor Shot Blasting Machine only the processing of the parts placed in the work box, the parts can follow the rotation of the rollers continue to roll, the surface 360° be sprayed. No visible grease, dirt, oxidized skin, rust, paint coating and other attachments are found after spraying.

The roller-type shot blasting machine is composed of a shot blasting device, a roller and a driving device, a projectile circulation system, Roller Conveyor Shot Blasting Machine a dust collector and an electric control device. In the initial period, the projectile circulatory system consisted of an internal reservoir to hoist the mechanism, a fixed sieve and an air flow separator, and a cyclone dust remover was used; Om end cover connected with the body, is manual to open and close, because it is only manual to discharge, Roller Conveyor Shot Blasting Machine the labor intensity is very large; diameter 1.3m specification end cover and roller body are removed, also have a hydraulic transmission of the feeding device and end cover opening and closing device, Roller Conveyor Shot Blasting Machine can reverse automatic unloading, can achieve loading, unloading mechanization, so as to improve the production efficiency, thereby improving the labor bar after the improvement of the Q31 series of equipment has the following characteristics: Q3113A and q3113b type are hydraulic driven feeding device and end cover opening and closing device, although it is to improve equipment loading, unloading mechanization degree, but also increased the maintenance workload.

Roller-type shot blasting machine as a common equipment of shot blasting machine, Roller Conveyor Shot Blasting Machine equipment is often used, it needs to be maintained:

1, Annual maintenance:

(1) Overhaul all motor bearings, (2) Check the lubrication of all bearings and add new grease: Check the corrosion of the air cylinder guide pipe and the inner wall oil accumulation, if the corrosion is serious, then the replacement, if more oil, then cleaning; (3) Replacement or welding repair in the area of the guard plate, (4) Overhaul of the dust remover, if there is damage is replaced, if the sticky ash more cleaning.

2, Quarterly maintenance:

(1) Check motor, sprocket, fan, Roller Conveyor Shot Blasting Machine the tightness of the screw conveyor's fixed bolt and flange connection; (2) Check the bearing, the electric control box's good condition; (3) Replace the new high speed lubricating grease for the bearing of the main bearing seat of the shot-peening device, (4) Roller Conveyor Shot Blasting Machine Check the wear of the abrasion resistant plate of the shot blasting device

3, the Monthly maintenance:

(1) Check whether the transmission part is running normally and lubricate the chain, (2) Check the wear and fixing of the blower and duct, (3) Roller Conveyor Shot Blasting Machine Check the fixing condition of the bolts at each part connection.

4, Daily Maintenance:

(1) Abrasion of wear parts in shot blasting device, and timely replacement; (2) whether the signal of the control station is normal, (3) the status of each limit switch is normal, (4) cleaning the dust on the Electric control box, (5) whether the fixing bolts on the machine of the shot blasting machine and the shot blasting device are loose; (6) Dust Removal pipeline has no leakage phenomenon, Roller Conveyor Shot Blasting Machine dust filter bag dust or broken, (7) Whether the door is closed, (8) The filter in the separator with the accumulation of materials and timely removal; (9) whether the electronic control of the ball valve is closed (10) The abrasion of the indoor Guard Board of shot blasting.

Copyright © Qingdao Jichuan Machinery Manufacturing Co.,Ltd. All rights reserved.
QR Code