Email:kristie@jcpaowanji.com Qingdao Jichuan Machinery Manufacturing Co.,Ltd

Qingdao Jichuan Machinery Manufacturing Co.,Ltd

Sandblasting Room Suitable For Some Large Workpiece Surface Cleaning

Sandblasting room is a kind of abrasive (silica sand, iron, steel pill, etc.) with the help of air pressure, sprayed onto the surface of the workpiece a mechanical, sprayed on the surface of the workpiece on the metal surface of the impact of abrasive grinding, the removal of surface impurities, rust, paint, Sandblasting Room oxide skin and so on. The injection mode is divided into self suction type and pressing type. Because the pressure is in the same container in the compressed air and abrasive side of the mixing side jet, Sandblasting Room so that compressed air is fully utilized, and air flow and sand volume is easy to adjust, suitable for large area cleaning, high efficiency, but also widely used in the tube inner wall cleaning.

The main characteristic of Sandblasting house is that the operator is indoors in the process of sandblasting. Protective clothing and helmets can prevent the operator from being subjected to abrasive shocks, Sandblasting Room and the ventilation device provides fresh air for the operator through a helmet.

Sandblasting room is mainly used for large parts or the use of automatic sandblasting equipment to deal with very expensive parts. The nozzle manipulator installed in the sandblasting room can spray sand on the surface of the parts automatically, and the area which is difficult to be reached by sandblasting can be completed by manual sand blasting. Sandblasting Room This has not only maintained flexibility, but also reduced the number of sandblasting operator requirements.

Sandblasting room to adapt to some large-scale workpiece surface cleaning, rust removal, increase the adhesion between the workpiece and coating effect, DISA sand blasting room sandblasting room According to the recovery of abrasive spray room is divided into: mechanical recovery type shot peening room and artificial recovery type shot peening room. The artificial recovery of sandblasting room because of economic and practical, easy to make, convenient, easy to use wood, Sandblasting Room greatly reducing the cost of sand blasting room, but also by many customers, especially small and medium-sized enterprises to accept. Some customers even use bricks to build sand blasting room, which hangs wear-resisting rubber skin, very practical.

Sandblasting Machine series wet and dry divided into two categories of high-pressure, general pressure. Including box-type, roller-type, mobile, turntable, automatic series and sandblasting room, such as more than hundred kinds of products. No matter what kind of workpiece, large to hull, steel structure, container, small to the case, buttons, needles and so on, sandblasting machine application: pretreatment: electroplating, painting, spraying, Sandblasting Room and so on all covered before processing sandblasting, the surface is absolutely clean, while greatly improving the coating adhesion and corrosion resistance. Cleaning: Casting parts, stamping parts, welding parts, heat treatment parts, such as metal workpiece to oxidize the skin, residue, dirt; non-metal products surface cleaning, ceramic germ parts surface black spots to remove and reduce the paint pattern. Refurbishment of old pieces: refurbishment and cleaning of all moving parts such as automobiles, motorcycles, electromechanical equipment, etc. Meanwhile, the fatigue stress is eliminated and the service life is prolonged. Light decoration: All metal products and non-metallic products (plastic, crystal, glass, etc.) surface traces of the elimination, argon matte surface treatment, so that the product surface upgrading. Mold Processing: surface of the mold argon fog surface treatment, graphic production, as well as mold cleaning, not injury and mold surface, Sandblasting Room to ensure the accuracy of the mold. Burr treatment: Machining parts micro-knife removal, plastic injection parts overflow edge elimination. Bad quality rework: Product bad cover layer removal, surface bad coloring and printing word removal. Sandblasting room is a kind of abrasive through the air pressure, sprayed on the surface of the workpiece a mechanical, Sandblasting Room sprayed on the surface of the workpiece on the metal surface of the impact of abrasive grinding, removal of surface impurities, rust, paint, oxide skin and so on. The injection mode is divided into self suction type and pressing type.


Copyright © Qingdao Jichuan Machinery Manufacturing Co.,Ltd. All rights reserved.
QR Code